Molyphos chain lube IS BEL RAYS CLASSIC CHAIN LUBE WITH EXCLUSIVE MOLYPHOS ADDITIVE. THIS ENABLES FILM STRENGTH TO REDUCE FRICTION AT PRESSURES UP TO 100,000 p.s.i. THIS FOAMING BLACK /GREEN ADVANCED FORMULATION IS SUITABLE FOR ALL TYPES OF MOTORCYCLE DRIVE CHAINS
PACK SIZES
229ML
582ML
Super clean chain lube IS A UNIQUE FORMULATION IN CHAIN LUBE TECHNOLOGY. LIVES UP TO IT’S NAME AND KEEPS YOUR BIKE AND REAR WHEEL SUPER CLEAN, NO BLACK STICKY MESS. FORMS AN OUTER COAT WHICH REPELS DIRT DUST SAND AND WATER WHILE MAINTAINING LUBRICATION AND ACTING AS A CUSHION BETWEEN CHAIN AND SPROCKETS FOR SMOOTHER QUIETER RUNNING. GOES ON LIQUID AND SETS TO A NON STICKY FILM IN SECONDS. SUITABLE FOR ALL TYPES OF MOTORCYCLE CHAINS.
“ABSOLUTELY WILL NOT FLING OFF”
ITS BEEN TESTED TO 212 MPH FROM A STANDING START (THAT’S A TEST)
PACK SIZES
229ML
582ML
ITS BEEN TESTED TO 212 MPH FROM A STANDING START (THAT’S A TEST)
PACK SIZES
229ML
582ML
How do you apply Bel-Ray Super Clean Chain Lube without getting the lube on the rim of my wheel?
Something that we can’t stress enough is to follow the proper directions for application with Bel-Ray Super Clean Chain Lube. Bel-Ray Super Clean should be applied to a clean chain and always be sure to use the plastic hose every time you spray your chain. The spray pressure and pattern with the hose is designed to hit a chain with minimal overspray and wasted product. Spin the rear wheel and spray the chain near the bottom chain roller or where it spans from the front sprocket to rear sprocket. Be sure to traverse the chain so you get the side plates, ‘O’ Rings, and rollers. After giving the inside of the chain a good coating, spray the top of the chain as it is passing over the chain buffer. Lubing your chain back by the rear wheel is not a good practice because, besides the rim, your brake rotor could get some overspray. Be sure to lube your chain frequently as well. A properly lubed chain does wonders for maximizing rear wheel horsepower!
As for that overspray on your rim, a little Bel-Ray Brake and Parts Cleaner will take it right off.
Something that we can’t stress enough is to follow the proper directions for application with Bel-Ray Super Clean Chain Lube. Bel-Ray Super Clean should be applied to a clean chain and always be sure to use the plastic hose every time you spray your chain. The spray pressure and pattern with the hose is designed to hit a chain with minimal overspray and wasted product. Spin the rear wheel and spray the chain near the bottom chain roller or where it spans from the front sprocket to rear sprocket. Be sure to traverse the chain so you get the side plates, ‘O’ Rings, and rollers. After giving the inside of the chain a good coating, spray the top of the chain as it is passing over the chain buffer. Lubing your chain back by the rear wheel is not a good practice because, besides the rim, your brake rotor could get some overspray. Be sure to lube your chain frequently as well. A properly lubed chain does wonders for maximizing rear wheel horsepower!
As for that overspray on your rim, a little Bel-Ray Brake and Parts Cleaner will take it right off.